Palamut Group

PRODUCTS PRODUCTS

CCN0 T1

SIZES

Cm

240 X 200 X 170

WEIGHT

Kg

350

ELECTRICAL FEEDING

Volt

220 / 50 - 60 hz

ABSORBED POWER

Kw

1,1

PNEUMATIC FEEDING

BAR

6

The model CCN0-T1 is a two axes gluing system with work surface of 600x400 mm. This model can do any adhesive applications: drop, curb or spray applications. 

Mod.CCN0-T can do linear and circular interpolations and therefore it can follow very complex gluing trajectories. The programmation is done by a personal computer, with Microsoft Windows 7 operating system, supplied with the machine The adhesive path are captured in teaching system, and so the operator doesn't have to introduce any numerical data but he has to position the applicator on the profile points and memorize them, after that the machine will perform automatically the gluing cycle. 

There is a second way to program the CCN0-T1: the opeartor can draw the gluing paths through CAD software "Overcad" supplied with the machine and also in this case the cycle will be controlled directly from ther comuter. Mod.CCN0-T has a suction system to capture the dust of spray adhesive. 

CCN3 3 VISION

SIZES

Cm

295 X 185 X 270

WEIGHT

Kg

550

ELECTRICAL FEEDING

Volt

220 / 50 - 60 hz

ABSORBED POWER

Kw

1,50

PNEUMATIC FEEDING

BAR

6

* The range of the gluing robots produced by Overmec is enriched of a new model: CCN3-3 VISION. This machine is equipped with an optical vision system with CMOS sensor camera 1.3 Megapixel. 

* The camera captures the form and the position of the pieces to glue, therefore the positioning of the articles on the table is free and no more bind to predefined positions. 

* The data are elaborated by a computer on board of the machine that commands the axis moving by interpolation the gun. 

* The machine is able to recognize an unlimited number of articles to glue, comparing the form of the pieces before programmed. 

* The command interface of the machine is realized on personal computer with operating system Windows XP Professional or Windows 7, assuring so an easy use of the machine. Equipping the machine with a personal computer and using its power of calculation, the time between the start of the machine and the start of the gluing cycle is not more long than 2-3 seconds. 

* The machine is equipped with a suction system for capturing the glue overspray. 

CCN3 3T VISION

SIZES

Cm

295 X 185 X 270

WEIGHT

Kg

550

ELECTRICAL FEEDING

Volt

220 / 50 - 60 hz

ABSORBED POWER

Kw

1,50

PNEUMATIC FEEDING

BAR

6

* The range of the gluing robots produced by Overmec is enriched of a new model: CCN3-T3 VISION. This machine is equipped with an optical vision system with CMOS sensor camera 1.3 Megapixel. 

* The camera captures the form and the position of the pieces to glue, therefore the positioning of the articles on the table is free and no more bind to predefined positions. 

* The data are elaborated by a computer on board of the machine that commands the axis moving by interpolation the gun. 

* The machine is able to recognize an unlimited number of articles to glue, comparing the form of the pieces before programmed. 

* The command interface of the machine is realized on personal computer with operating system Windows XP Professional or Windows 7, assuring so an easy use of the machine. Equipping the machine with a personal computer and using its power of calculation, the time between the start of the machine and the start of the gluing cycle is not more long than 2-3 seconds.

* The machine is equipped with a suction system for capturing the glue overspray.  

TB 1600 NA

SIZES

Cm

250 X 300 X 180

WEIGHT

Kg

680

ELECTRICAL FEEDING

Volt

220 / 50 - 60 hz

ABSORBED POWER

Kw

5,20

PNEUMATIC FEEDING

BAR

6

* The model TB1600-NA is an automatic machine for applying water base adhesive by spraying. 

* The maximum width of working is mm 1540. The material is placed on a belt conveyor that moves forward while the spray gun, that applies the adhesive, moves alternatively from right to left. 

* The possibility to adjust the time and the advancement speed of the belt conveyor and also the gun speed, permits to obtain a good application of the adhesive. 

* The model TB1600-NA is equipped with a motor fan unit that blows warm air on the glued materials placed on the back side of the belt conveyor. 

* The air temperature is adjustable and may arrive till 70° C. The suction unit permits also to reactivate the adhesive for having a better adhesion of the parts.  

* The belt conveyor (very easy to change) is realized on polyester fiber with thickness of mm 5. The suction under the belt conveyor blocks the goods during the adhesive spraying phase. 

* The suction system, beyond to block the goods on the conveyor belt, attracts the overspray between 4 panels filters interchangeable, placed on the left, right and back sides of the machine. 

* The programming of the different working cycles is by LCD touch screen. 

TS3 30 / HV1 / 2 / 31

SIZES

Cm

95 X 85 X 170

WEIGHT 

Kg

80

ELECTRIC FEEDING

Volt

220 / 50 - 60 hz (monofaz)

ABSORBED POWER

Kw

0,3

PNEUMATIC FEEDING

Bar

6

* The continuous evolution of the ecological water base adhesives explains their progressive substitution of the traditional adhesives with solvent.

* The new adhesives find in the spray system an optimal way to get the homogeneous distribution of the product, with a big saving of adhesive. Overmec has set a spray system able to optimize these new technologies, having realized a device equipped with all the necessary regulations to get precise adhesive applications.

* The guns are all equipped of microregulation and are fixed on a balancer that makes them extremely manageable.

* The adhesive tank is built in stainless steel to have the best reliability. 

* The guns are also built in stainless steel or in a special league of anticorrosive aluminum.

* The models of TS3 series can be used in the shoes sector for uppers glueing, for bags and small leather items and in the other industrial activities where water-based adhesives are using.

* The TS3 models are supplied with an aspiration table, that has been built with a new concept: unite the advantages of the double aspiration on the plan and around three sides with the possibility to capsize, at the necessity, the walls aspirant left and right, bringing therefore the job-plan from cm.80x65 to cm 150x65. The capsize operation requires few seconds and the walls, in this position, stay in communication with the aspiration system.

* The table is equipped with a fan motor at low noises, it permits to spray also on a light material and without any eventually loosing of adhesive dust.  

TS8 31 BB

SIZES

Cm

50 x 75 x 110

WEIGHT 

Kg

27

ELECTRIC FEEDING

Volt

230 (monofaz)

ABSORBED POWER

Kw

0,1

SUCTION FLOW

M3 / h

600

* This model is equipped with the microspray gun cod.  

11202-02 in aluminum with nozzle 0 1.0, spray pattern from 6 to 30 mm of diameter, high precision of spraying with lever and treadle  

Copyright © 2014 Palamut Group. All Rights Reserved.

Maverainteraktif
2Bin Müsibet Bir Nasihat